인테리어필름 시공견적

The interior film varies only depending on the desired color, texture, and pattern. Since the film paper required for a wide furniture surface and the film paper suitable for a narrow and long form such as a molding or a mop are different, when purchasing, carefully consider and select the sales specifications. The narrower the price, the lower the amount of film paper wasted when cutting.

Below is the basics of interior film. It is helpful to know.

[I'm curious about the construction process of the interior film.]
Interior film is not as simple as it seems. Once attached, it is almost impossible to remove it on purpose, so careful work is required. First, check whether the background surface to which the interior film is to be attached is in an appropriate state. If it is contaminated, use a cloth dampened with alcohol or thinner to remove dirt or grease from the surface. Then, the ground surface to be applied to the film, the corners, and the protrusions are evenly polished with sandpaper. After the polishing work is finished, apply the film uniformly using a primer exclusively for the film to prevent spotting on the surface to which the film is attached. This is a necessary process because the adhesive strength varies up to 3 times depending on whether or not the primer is applied. It is better to apply the primer 1 or 2 times to the corners than the flat surface. When the primer is completely dried, the construction starts. At this time, it is recommended to apply in the environment of 10 ℃ or higher. This is because the interior film may not be flexible enough when applied when the temperature is too low. In the case of the corner part, the film should be pressed while pulling lightly so that no bubbles or looseness remain in the corner. When attaching the film, it is usually attached by pushing it with a plastic squeeze from the top. At this time, if the pressure is applied reciprocally, air bubbles are generated, so it must be moved in only one direction.

[Is it okay to touch the water?]
Interior film has the disadvantage of being vulnerable to water. Be aware that defects may occur when interior film is applied to a kitchen cabinet with a lot of water.

[How long is the maintenance period?]
Well-maintained interior film can be used for up to 10 years. Unless the flaw occurs and falls naturally, it is almost impossible for the general public to deliberately remove it.

[Can it be replaced with another film after construction?]
It is possible. If you want to change the color or texture after the interior film construction, you can rebuild the interior film by overlaying the interior film.

[How much is the construction cost?]
The price varies depending on the type of film used and the adhesive area. However, it is usually cheaper than the cost of painting the same area.

[Can self-construction be possible?]
If the area is small, it can be self-constructed, but it is safe to work with a professional when constructing a large surface such as a door or wall. Solid color solid if self-construction is a must
It is recommended to choose a texture material rather than a material. Even if the construction is uneven, it is not noticeable.

[Is interior film a safe material?]
The recently released interior film can be used with confidence because it is not only flame-retardant but also environmentally friendly. In 2015, Green Consumer Natural University conducted a physical property test for interior films, but at that time, problems were found in quite a few brands, but the market of the market changed completely after that.