Tolerance and fits ISO
ID: com.MashkovKO.Dopuski_I_posadki_GOST
-
เวอร์ชั่น:
Varies with device
-
อัปเดตเมื่อ:
2023-01-28
ดาวน์โหลด APK ทันที
รับประกันการติดตั้งที่ปลอดภัย ไม่มีโฆษณาเพิ่มเติมหรือมัลแวร์
คำอธิบายของ Tolerance and fits ISO
Application features:
1) Reference information on the value of tolerances for dimensions from 1 to 10,000 mm corresponding ISO-286;
2) Selection of tolerance, according to a given value of dimensional deviation (offers 5 tolerance options);
3) The selection of fit will help, according to the given size value and the selected deviation of the shaft or hole, it will help to select the fit of the mating part with the determination of the gap and tightness of the connection.
4) The Shape Tolerances section shows a brief reference description of part geometry deviation in accordance with ISO 1101 and Russian ГОСТ 2.308.
5) Angle tolerances show the deviations of the values of the angular dimensions, converts the taper value into an angle (in decimal units and degrees - minute - second). Shows the value of all sides of a triangle.
6) Dimensional calculation is a very convenient tool for quickly determining the value of the closing link. The section solves the inverse problem by the maximum-minimum method. All calculations are saved.
7) Casting tolerances include the value of deviations depending on the selected accuracy class. Permissible accuracy classes are determined by the chosen casting technology, everything is developed in full accordance with russian ГОСТ.
Advertising policy of the application - the existing advertising does not interfere with the user, there are no interstitial advertising.
Any information provided by the application is for reference only.
1) Reference information on the value of tolerances for dimensions from 1 to 10,000 mm corresponding ISO-286;
2) Selection of tolerance, according to a given value of dimensional deviation (offers 5 tolerance options);
3) The selection of fit will help, according to the given size value and the selected deviation of the shaft or hole, it will help to select the fit of the mating part with the determination of the gap and tightness of the connection.
4) The Shape Tolerances section shows a brief reference description of part geometry deviation in accordance with ISO 1101 and Russian ГОСТ 2.308.
5) Angle tolerances show the deviations of the values of the angular dimensions, converts the taper value into an angle (in decimal units and degrees - minute - second). Shows the value of all sides of a triangle.
6) Dimensional calculation is a very convenient tool for quickly determining the value of the closing link. The section solves the inverse problem by the maximum-minimum method. All calculations are saved.
7) Casting tolerances include the value of deviations depending on the selected accuracy class. Permissible accuracy classes are determined by the chosen casting technology, everything is developed in full accordance with russian ГОСТ.
Advertising policy of the application - the existing advertising does not interfere with the user, there are no interstitial advertising.
Any information provided by the application is for reference only.
แสดงมากขึ้น
Tolerance and fits ISO Varies with device APK สำหรับ Android Varies with device+
เวอร์ชั่น | Varies with device สำหรับ Android Varies with device+ |
อัปเดตเมื่อ | 2023-01-28 |
การติดตั้ง | 10.000++ |
ขนาดไฟล์ | 65.107.968 bytes |
สิทธิ์ | ดูสิทธิ์ |
มีอะไรใหม่ |
Added tolerances and fits ASME B 4.1 Improved selection of landings Fixed other minor bugs |
ประวัติเวอร์ชัน:
- 1. LATEST. Tolerance and fits ISO Varies with device APK (2023-01-28, 62 MB)
- 2. Tolerance and fits ISO Varies with device APK (2022-09-08, 56 MB)
- 3. Tolerance and fits ISO 5.0.1 APK (2022-07-22, 53 MB)
- 4. Tolerance and fits ISO 5.0.1 APK (2022-07-09, 53 MB)
- 5. Tolerance and fits ISO 5.0.0 APK (2022-06-01, 33 MB)
- 6. Tolerance and fits ISO 4.0.2 APK (2021-12-13, 33 MB)
- 7. Tolerance and fits ISO 4.0.2 APK (2021-12-02, 35 MB)
- 8. Tolerance and fits ISO 4.0 APK (2021-11-17, 35 MB)
- 9. Tolerance and fits ISO 3.1 APK (2021-10-10, 22 MB)
- 10. Tolerance and fits ISO 3.0 APK (2021-05-16, 17 MB)
- 11. Tolerance and fits ISO 2.2 APK (2021-03-15, 17 MB)
- 12. Tolerance and fits ISO 0.13 APK (2021-01-19, 17 MB)
- 13. Tolerance and fits ISO 0.12 APK (2021-01-15, 17 MB)
- 14. GOST tolerances and landings 0.8 APK (2020-11-11, 14 MB)
- 15. GOST tolerances and landings 0.5 APK (2020-10-06, 14 MB)
แสดงมากขึ้น
คล้ายกับ "Tolerance and fits ISO"
ตี APK
แสดงมากขึ้น