TAt16sWiFi
ID: com.ssm.btnds18b20.at16swifi
-
版本:
Varies with device
-
更新于:
2021-09-14
立即下载 APK
保修安全安装,无附加广告或恶意软件
的描述 TAt16sWiFi
The scope of the application is a car, a greenhouse, a house, hung with thermometers (ds18b20, ds1820), some research related to measuring temperatures in the range from -55C ° to + 125C °. Controlling the temperature of batteries, expensive transistors, overheating of which can damage them, and this is a new expense of money that could be spent on more important decisions and tasks.
The application receives the measured temperature via WiFi, in the range from -55C ° to + 125C ° with a ds18b20 or ds1820 digital thermometer and displays it in the application, and according to the user configured data in the application, turns on or off the TTL signal on the Atmega16 microcontroller outputs, set by the rules for the value received temperature. It is also possible to manually turn on and off the necessary TTL signals at the outputs of the Atmega16 microcontroller.
The measurement is controlled by Atmega16 and sent to this application via WiFi module ESP8266. This is an integral part of the application, only the application works with it.
This solution can be used wherever you need a convenient measurement of temperatures, with their display on the screen of a tablet, phone, and similar devices running Androd 4.2 and higher that support WiFi, have a touch screen and have a place to save the settings files of this application, with the ability saving temperature data, as well as protocols of exchange with thermometers and the control module, in the form of files, for each thermometer separately.
The number of thermometers can be more than two; their installation in the system is done one at a time, using a special request that the application executes.
The application receives the measured temperature via WiFi, in the range from -55C ° to + 125C ° with a ds18b20 or ds1820 digital thermometer and displays it in the application, and according to the user configured data in the application, turns on or off the TTL signal on the Atmega16 microcontroller outputs, set by the rules for the value received temperature. It is also possible to manually turn on and off the necessary TTL signals at the outputs of the Atmega16 microcontroller.
The measurement is controlled by Atmega16 and sent to this application via WiFi module ESP8266. This is an integral part of the application, only the application works with it.
This solution can be used wherever you need a convenient measurement of temperatures, with their display on the screen of a tablet, phone, and similar devices running Androd 4.2 and higher that support WiFi, have a touch screen and have a place to save the settings files of this application, with the ability saving temperature data, as well as protocols of exchange with thermometers and the control module, in the form of files, for each thermometer separately.
The number of thermometers can be more than two; their installation in the system is done one at a time, using a special request that the application executes.
展示更多
TAt16sWiFi Varies with device APK 为了 Android Varies with device+
版本 | Varies with device 为了 Android Varies with device+ |
更新于 | 2021-09-14 |
安装 | 5++ |
文件大小 | 1.622.635 bytes |
权限 | 查看权限 |
什么是新的 | target SDK 31 |
版本历史:
- 1. LATEST. TAt16sWiFi Varies with device APK (2021-09-14, 2 MB)
- 2. TAt16sWiFi 1.0 APK (2021-01-17, 253 KB)
- 3. TAt16sWiFi 1.0 APK (2021-01-10, 245 KB)
- 4. TAt16sWiFi 1.0 APK (2021-01-07, 237 KB)
展示更多
相似 "TAt16sWiFi"
命中 APK
展示更多